Rorke Data The Galaxy 65 Spécifications télécharger pdf (Page 109)

Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual

5-14 Subsystem Maintenance

 Replacing a cooling module: When you are notified that a cooling module

has failed, it should be replaced as soon as possible. A failed cooling

module should only be removed from the subsystem when you have a

replacement module that can be installed as soon as the failed cooling

module has been removed.

WARNING!

It is not advisable to run the subsystem with a single cooling module for a

long period of time. If the second cooling module fails, the system is at

risk of sustaining irreparable damage.

5.5.2 Replacing a Cooling Module

To replace a cooling module, please follow these instructions:

Step 1. Remove the cooling module by pressing the slide lock on the

side of the module towards the center of the chassis and then

pulling the module out of the chassis.

Figure 5-11: Removing the Cooling Module

Step 2. Gently slide the new cooling module into the chassis. Do not

use force or slam the module. The slide lock will hold the

module in place. If the cooling module is added online, the

respective cooling fan LEDs should light constant green.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 128 129

Pas de commentaire

Rorke Data The Galaxy 65 Spécifications Page 109