Rorke Data The Galaxy 65 Spécifications télécharger pdf (Page 42)

Galaxy GHDX-2422S-8+12F4D Installation and Hardware Reference Manual

Drive Tray Installation

2-14

2.10 Drive Tray Installation

Once the hard drives have been installed in the drive trays, the drive trays must be

installed into the subsystem.

WARNING!

All drive trays must be installed into the enclosure even if they do not contain a

hard drive. If the trays are not installed into the enclosure, the ventilation required

for cooling will be disturbed and the subsystem will overheat.

Step 1. Make sure that the hard drive is secured to the drive tray. Make sure

the key-lock is in the unlocked position. The key-lock is unlocked if the

groove on its face is in a horizontal orientation. If the groove is in a

vertical position, as shown in Figure 2-9, then the key-lock is locked

and the front flap on the drive tray cannot be opened.

Figure 2-9: Front View of an Individual Drive Tray

Step 2. Open the front flap on the drive tray. (See Figure 2-10) To open the

front flap, push the release button (shown in Figure 2-9) on the front

bezel. The front flap will open in an upward direction.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 99 100

Pas de commentaire

Rorke Data The Galaxy 65 Spécifications Page 42