Rorke Data The Galaxy 65 Spécifications télécharger pdf (Page 49)

Chapter 3: Subsystem Monitoring

Status-indicating LEDs

3-5

3.2.2.1 FC Controller Module LEDs

The FC controller modules have additional two (2) LEDs, labeled A and B. The

definitions of these LEDs are shown in Table 3-3 below.

LED Name Color Status

A CH0 LINK

Green

ON indicates that channel 0 link has been established.

OFF indicates that channel 0 link has not been established.

B CH1 LINK

Green

ON indicates that channel 1 link has been established.

OFF indicates that channel 1 link has not been established.

Table 3-3: FC Port Link Status LEDs

3.2.3 LAN Port LEDs

Both the 8bay ans 12 bay Galaxy subsystems come with a RS-232C audio jack serial port

that can be used to assign a permanent IP to the subsystems. After a permanent IP address

has been assigned, an Ethernet cable can be used to connect the RJ-45 Ethernet port to a

network hub or router. This enables you to manage your subsystem locally or remotely

over TCP/IP. See Figure 3-2 for the locations of the two LED indicators on Ethernet

port. Refer to Table 3-4 for the LED definitions.

Figure 3-2: LAN Port LEDs

LED Name Color Status

Link Status

Green

ON: Indicates a valid connection to network

LAN Activity

Green

BLINKING: Indicates active transmissions

Table 3-4: Ethernet Port LED Definitions

Link Status

Activity

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 99 100

Pas de commentaire

Rorke Data The Galaxy 65 Spécifications Page 49